Roof Drains

3" through 8"
For Non-Pressure Application (DWV)

Description	Part Number	Size Outlet	List Price Each	Material
Roof Drain	#PVC-3553	3"	$85	Body & Dome PVC
	#PVC-3554	4"	$96	Body & Dome PVC
	#PVC-3556	6"	$175	Body & Dome PVC
	#PVC-3558	8"	$220	Body PVC / Dome Aluminum
Accessory: Under Deck Clamp	#CL-3555	For use with 3" & 4" Roof Drains	$52	Plastic or Gray Enamel - Coated Clamp Collar 6" Long Studs, Washer and Nuts
	#CL-3557	For use with 6" & 8" Roof Drains	$65
Accessory: 16" Receiver Pan Attachment (Cement to drain flange to widen sealing area)	#PRD-16	For 3", 4", 6", or 8"	$75	Plastic Roof Drain Options: Drain with Receiver And with under deck clamp
Scupper Drains	#DPP-RD-270 or DPP-RD-290 (A or B suffix)	2", 3" or 4"	$325	PP Black (White grate also available) PVC = Polyvinyl Chloride PP = Polypropylene

Warranty

Seller's products are carefully inspected for manufacturing defects; however, it is not always possible to detect hidden defects. Said products are warranted only to the extent that Seller will replace without charge, products proved to have manufacturing defects with 6 months of the date of delivery thereof and provided Seller has been given an opportunity to inspect the product alleged to be defective and the installation or use thereof.

No warranty is included against any expense for removal, reinstallation or other consequential damages arising from any defect. The warranties set out above are the only warranties made by seller and are expressly in lieu of all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose.

Caution

Town & Country Plastics recommends against the use of thermoplastic piping systems for transport or storage of compressed air or other compressed gasses or the testing of such systems with compressed air or other compressed gases in exposed, above ground location. Use of T&C plastic piping products in exposed compressed gas systems voids our warranty for the products so used. For further information, contact our Research & Development department.

Safety Precautions

Plastic pipe cements contain highly volatile flammable solvents which evaporate rapidly and are considered toxic under conditions of frequent or prolonged exposure at high concentrations. Avoid breathing the vapors. If necessary, use a fan to keep the work area clear of fumes. Use of solvent proof gloves (polyethylene or other) is recommended. Avoid eye or skin contact. If a reaction occurs, contact your physician. Do not use near heat, sparks, or open flame. Do not pressure test with compressed air or gas. Severe damage or bodily injury can result.

Previous Page | Next Page