Click to see each page: Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6

T&C is The Leader in Superior HDPE and PP Neutralization/Dilution Tanks, Sumps, Basins, Equipment & Systems

Choose Between Four Methods of Neutralizing and/or Diluting
Chemical Bearing Wastes and Effluents:

Contact us for Guide Specifications and Drawings for you to copy, for any System Below.

Method #1 - Passive Systems, Offered TWO Ways:
Method #1 (A) / Passive System - Single Treatment Tank (No Sampling or Monitoring). Method #1 (B) / Passive System - Single Treatment Tank plus Sampling Tank with or without Optional Monitoring, Alarming or Recording Systems. (Model #K-100A or Model #K-100AM).
Most Common / Lowest Cost (Small & Large Tanks)

Standard T&C round, (vertical / cylindrical) flat bottom tanks for use in collecting or intercepting, chemical bearing wastewaters, above or below ground. This can be done with diluting liquids or water and/or neutralizing agent (limestone chips, chemicals or gases). Anyone can sell you a tank, but T&C offers superior, quality tanks and fittings, designed specifically to handle the worst chemicals for your applications. The most commonly used, lowest cost, practical choice for treating polluted wastes, for most installations. (Round, cone bottom, rectangular, square and horizontal/cylindrical tanks are also available.) Extensions can be had for tanks in certain below ground situations. These T&C tanks can be used for the storage, sampling and/or pumping of chemicals. Also available as small, under sink units.
Method #2 - Active Treatment Systems - Chemical Feed / Mixing Systems, Offered THREE Ways:
Method #2 (A) Active System - Straight Chemical Treatment Only.
Method #2 (B) Active & Passive System - Straight Chemical Treatment plus Pretreatment Tank.
Method #2 (C) Active & Passive System - Straight Chemical Treatment with Pretreatment Limestone Tank.
(Best Method)

More Precise Control / More Expensive

This method offers the same standard T&C round, flat bottom tanks, modified slightly for more sophisticated chemical feed treatment, mixing and pH monitoring and controling of chemical bearing wastewaters. These systems usually include chemical feed and connecting polypropylene pumps, piping, fittings, valves, alarms, recorders, etc. This method is more expensive, but more sophisticated and can provide more precise control of the effluents being discharged. The tanks also are available in different shapes for above or below ground use. These systems usually include a sampling tank and chemical feed tank(s). NOTE: Variations of this set up are available. Check with factory for details.

Method #3-Shunt Tank System Method #4-Double Wall Tanks
Two Parallel Systems Help You
Avoid Shutdowns For Servicing

This method consists of at least two separate standard T&C round, flat bottom tanks or systems for each drainage piping system. We call this system the "shunt (multiple) tank method." You can use the same tanks, as mentioned in either one of the above passive or active tank system methods. However, this "shunt method" should be chosen where improved maintenance servicing is necessary; particularly when system shutdowns must be avoided, such as in hospitals, research facilities, production/manufacturing plants, etc. This system usually includes two or more polypropylene valves and some polypropylene fittings and pipes. This method allows one tank or system to be shut off for servicing or cleaning, while wastewater flows to other tanks or systems. Thus, your facility remains on-line, at all times.		 Added Safety With Secondary Containment (with or without leak detection)

These double walled, round, flat bottom, T&C tanks offer improved and greater safety, against possible chemical leakage, in below and above ground installations. Chemical leakage monitors and/or chemical displacement pumps can be installed between the inner & outer walls. (Check with factory.) The double wall results from two tank construction - a tank within a tank. The inner tank neutralizes/dilutes the effluents, while the outer tank is a containment tank. Many states and local jurisdictions are demanding this type of double walled protection. NOTE: Fitting Connections are welded to both tank walls. We can recommend other ways to do double wall containment, such as in special concrete vaults (pits).
Call or Fax T&C for Quicker Response to Your
Specific Literature or Product Requirements.

Custom Engineered Tanks & Systems | Pollution Handling and Treatment Equipment / Systems | Corrosion and Acid Resistant Products | T&C is The Leader in Superior HDPE and PP Neutralization/Dilution Tanks, Sumps, Basins, Equipment & Systems | T&C Rigid-Plastic Grease and Oil Interceptors / Traps | Rigid - Plastic Sediment Interceptors | Sinks & Accessories | Floor Drains and Floor Sinks | Pipes, Valves & Fittings