Maintenance:
Sediment baskets must be inspected periodically for possible maintenance. The interceptor housing basket and baffles should be thoroughly cleaned for optimum service. Typically, each interceptor should be inspected once a month. However, inspection and cleaning should be increased or decreased based upon system usage, flow rate and waste composition and quantity. The removable cover, removable basket and removable screens make it easy to inspect and clean T&C sediment interceptors.
Typical Applications:
There are numerous applications for T&C sediment interceptors in all kinds of industrial, institutional, food service and commercial installations. Here are a few typical applications; restaurant (fish scales, food solids, etc.), dental labs, art rooms and earth science rooms in schools, emergency rooms (plaster casts) in hospitals, metallurgical labs, beauty & laundries, glass bottling plants, automobile service stations, etc.
|
Standard Sediment-Interceptor Dimensions |
|
Interceptor
Model # |
# of sinks
to be Handled |
Inside Dimensions
(Diam. x Ht.)
Inches |
Approx
Wt. Lbs. |
Standard Inlets & Outlets, Inches |
Type of Connection |
Standard Fitting Centerlines, Inches |
|
SI-5 |
1 |
11x14 |
25 |
1-1/2 or 2 |
male
IPS Threads |
Inlet - 4
Outlet - 8-1/2 |
|
SI-15 |
1-4 |
18x15 |
45 |
1-1/2 or 2 |
male
IPS Threads |
Inlet - 5
Outlet - 10 |
|
SI-30 |
1-8 |
18x29 |
55 |
3 |
male
IPS Threads |
Inlet - 8
Outlet - 20 |
|
SI-55 |
1-12 |
22x36 |
75 |
3 or 4 |
male
IPS Threads |
Inlet - 8
Outlet - 26 |
Larger interceptors and special sizes or shapes are available upon request. Although fitting connections may be located anywhere of T&C interceptors, see above table for standard centerlines. Flanged connections and special adaptors are available upon request. Possession of this price list shall not be construed as an offer to sell products listed. Fitting centerlines above are from bottom of interceptors up to center fittings.
How To Specify:
Contractor shall furnish and install T&C polyolefin, high-density polyethylene (HDPE) plastic sediment interceptor(s), as indicated by model number and/or size on contract drawings. Contractor shall supply any adapters to tie interceptor(s) into the drain, waste and vent piping system. All piping connected to interceptor(s) should be properly supported to prevent unnecessary stress at inlet and outlet connections. Teflon tape should be used on inlet and outlet threaded fittings. Interceptor(s) should be installed on a solid, level foundation or support. Entire system shall be installed in accordance with manufacturer's recommendations, the local plumbing code and god workmanlike practices. Teflon is a product of E.I. du Pont de Nemour & Co. Contractor to also provide T&C PP unions.
Important Pricing Information:
All prices are F.O.B. Matawan, NJ. Allow 2-4 weeks for shipment of interceptors. (T&C products are warranted against manufacturing defects in workmanship or materials.)
Easy To Install • Easy To Maintain
Previous Page | Next Page
